Stock Available Stainless Steel Plate 2b Width 3000mm For Chemistry

Stock Available Stainless Steel Plate 2b Width 3000mm For Chemistry

1. Introduction

The choice of stainless steel plate to consider the use of operating conditions, such as manual operation or automatic operation, the performance and type of hot press, the quality of pressing material requirements such as hardness, luster, etc. Also consider the economic accounting, each new polishing steel plate, the requirements can produce a slow quality of the decorative plate times. In addition, when choosing the most reasonable thickness of the steel plate, the use time, quality and stiffness should be considered, and the strength requirements when the plate is pressed should be considered. Heat conduction performance; The distribution of pressure, the size of the plate. If the steel plate thickness is not enough, easy to bend, will affect the production of decorative plate. If the thickness is too large and the steel plate is too heavy, it will not only increase the cost of the steel plate, but also bring unnecessary difficulties to the operation. At the same time also consider the stainless steel plate processing or use should leave the allowance. The thickness of the copper plate is not absolutely consistent, but strive to be as consistent as possible in the same thickness of the steel plate, generally medium specifications of sawn plate, thickness tolerance is 0.05-o.15 mm. If the requirements are too strict, the grinding cost will also increase. Generally, it is a structure steel plate with high tension resistance and hardness. The greater the resistance to mechanical damage, the longer the durability of use, but the grounding and processing cost are also higher.

2. Product Show